SINOVO VFD Keypad

Keypad display statusis divided into stopping state parameter, running state parameter, function code parameter editing state and fault alarm state and so on.
When the AC drive is in the stopping state, the keypad will display stopping parameters. In the stopping state, various kinds of parameters can be displayed. Select the parameters to be displayed or not by F07.04. See the instructions of F07.04 for the detailed definition of each bit.

In the stopping state, there are 14 stopping parameters can be selected to be displayed or not. They are: set frequency, bus voltage, input terminals state, output terminals state, PID given value, PID feedback value, torque set value,AI1,AI2,AI3,HDI,PLC and the current stage of multi-step speeds, pulse counting value, length value. F07.04 can select the parameter to be displayed or not by bit and press > > button can shift the parameters from left to right, press button "S" (F07.01 = 2) can shift the parameters from right to left.

After the AC drive receives valid running commands, the AC drive will enter into the running state and the keypad will display the running parameters , the "RUN" LED on the keypad is on, while the "FWD/REV" is determined by the current running direction.

In the running state, there are 24 parameters can selected to be displayed or not. They are: running frequency, set frequency, bus voltage, output voltage, output torque, PID given value, PID feedback value, input terminals state, output terminals state, torque set value, length value, PLC and the current stage of multi-step speeds, pulse counting value,AI1,AI2,AI3,HDI,percentage of motor overload, percentage of AC drive overload, ramp given value, Linear speed, AC input current. F07.02 and F07.03 can select the parameter to be displayed or not by bit and press > > button can shift the parameters from left to right, press "S" F7.01 = 2) can shift the parameters from right to left.